??!

61 questions from our users

Manoj

Manojasked

Serie 4 SMS46KI01A (Silver Inox)

Good day,



Can you please confirm whether or not this series can be used as an under the bench dishwasher. The dimension is just right for my kitchen under the bench but not sure whether I need to buy a separate under the bench model, or this model could be used. Please confirm. Thanks for your help!

2 answers
Thien Sung Vun
Thien Sung Vun

Hi Manoj. Sorry i think that its best for you to ask Bosch.

Bosch Home Appliances
Bosch H.Bosch Home Appliances

Hi Maonj,
Thanks for the question regarding the Bosch SMS46KI01A dishwasher.
This model is a freestanding dishwasher however can sit under bench as well.
If you need any more help, feel free to contact us on 1300 369 744.
Regards, Bosch Home Australia

Reenie

Reenieasked

Serie 4 SMS46KI02A (Silver Inox)

Hi. I am wanting to buy this machine so why was it discontinued?



1 answer
Bosch Home Appliances
Bosch H.Bosch Home Appliances

Hi Reenie,
Thanks for the question regarding the Bosch SMS46KI02A. This model is still available to purchase. Please refer to our website https://www.bosch-home.com.au/shop
If you need any more help, feel free to contact us on 1300 369 744.
Regards, Bosch Home Australia

mim

mimasked

Serie 4 Dishwashers

We just installed a new bosche dishwasher series 4 white yesterday. Hasnt been used yet.
There is a bad sewrage smell coming from it. Anyone know why?

1 answer
Bosch Home Appliances
Bosch H.Bosch Home Appliances

Hi mim,
Thanks for your question. We're sorry to hear that you're having issues with your dishwasher.
We'd like to help, if you contact us on 1300 369 744 we’ll investigate for you. Regards, Bosch Home Australia.

henryryry

henryryryasked

Serie 4 Dishwashers

I recently bought a SMS46GW01A (white). My previous dishwasher was connected onto hot water (set at~ 50 degrees celcius). I was wondering whether it is ok to connect this to the hot water or else I will need to re-plumb the hot/cold water outlets. Are there any issues in connecting this dishwasher to the hot water?



Thanks!

1 answer
Bosch Home Appliances
Bosch H.Bosch Home Appliances

Hi Henryryry, Thanks for your question. If you are wanting to connect to a hot water supply, it's recommended to have the incoming water temperature set to at least 40 °C and no more than 60 °C. It's not recommended to connect the appliance to hot water if the water is supplied from an electric boiler. If you need any more help, feel free to contact us on 1300 369 744. Regards, Bosch Home Australia

Theresa09

Theresa09asked

Serie 4 Dishwashers

Hi I am interested in purchasing a Bosch SMS46G101A just would like to know if the machine is hard wired or if it is cord and plug connected.

1 answer
Bosch Home Appliances
Bosch H.Bosch Home Appliances

Hi Theresa09, Thanks for your question regarding the Bosch SMS46GI01A. This dishwasher is cord and plug connected If you need any more help, feel free to contact us on 1300 369 744.
Regards, Bosch Home Australia

Yvonne M.

Yvonne M.asked

Serie 4 Dishwashers

Does is switch off when finished?

2 answers
Paris
Paris

Mine switches off when it finishes the job.

Bosch Home Appliances
Bosch H.Bosch Home Appliances

Hi Yvonne M.,
Thanks for the question. Depending on the model to help save energy, the dishwasher switches off 1 minute after the programme ends. This is a factory setting that can be adjusted if needed.
If you need any more help, feel free to contact us on 1300 369 744.
Regards, Bosch Home Australia

Sam

Samasked

Serie 4 SMS50E32AU (White)

Hi, I purchased my dishwasher in 2013 and it’s been fine until recently where the machine will constantly stop mid cycle until you push against the door and then it starts again. This had only been happening once or twice during a cycle but now it’s nearly every few minutes. I’m thinking it’s a faulty door sensor and the machine is thinking that the door isn’t latching properly but it is, there’s no leaking.

1 answer
Bosch Home Appliances
Bosch H.Bosch Home Appliances

Hi Sam,
Thanks for your question We're sorry to hear that you're having issues with your dishwasher door.
We'd like to help, if you contact us on 1300 369 744 we’ll investigate for you. Regards, Bosch Home Australia

Dave

Daveasked

Serie 4 SMS50E32AU (White)

door won't open, what can I do to fix this?

1 answer
Bosch Home Appliances
Bosch H.Bosch Home Appliances

Hi Dave,
Thanks for the question regarding your Bosch dishwasher. We'd like to help, if email us at [email protected], quoting BSH4326 in the subject line we’ll investigate for you. Regards, Bosch Home Australia.

Mala R

Mala Rasked

Serie 4 SMS50E32AU (White)

What is vario eco in a Bosch dishwasher. How to use it?

No answers
Sarah

Sarahasked

Serie 4 Dishwashers

Can I get this model (Bosh series 4 super silence 46dB) fully integrated? I.e. So the door can match my kitchen cupboards?

1 answer
Bosch Home Appliances
Bosch H.Bosch Home Appliances

Hi Sarah,
Thanks for the question regarding a fully integrated dishwasher, Model SMV46GX01A is the series 4 super silence - low operating noise at only 46 dB(A) and is fully integrated. You can view this model specifications on our website http://www.bosch-home.com.au/.
If you need any more help, feel free to contact us on 1300 369 744.
Regards, Bosch Home Australia

T.A.S.Premalal

T.A.S.Premalalasked

Serie 4 SMS50E32AU (White)

When program on quick cycle mode at the 25th minute of remaining time check water indicator blinks on and program been stop
what would be cause of this?
BR
Premalal

1 answer
Bosch Home Appliances
Bosch H.Bosch Home Appliances

Hi T.A.S.Premalal,
Thanks for the question regarding your dishwasher. We'd recommend checking that the filters are clean, you can find full instruction for this in the 'General Maintenance' section of your user manual. If you need any more help, feel free to contact us on 1300 369 744.
Regards, Bosch Home Australia

Kelly K

Kelly Kasked

Serie 4 SMS50E32AU (White)

Hi
My dishwasher is about 5 years old now and a few months ago it started not switching on unless I slam the door shut quite hard and press power. It seems to take a few turns at shutting the door hard before it will power on. There is nothing blocking the door and it is being shut properly. Could it be a sensor or wiring issue?

1 answer
Bosch Home Appliances
Bosch H.Bosch Home Appliances

Hi Kelly K, thanks for your question. It sounds like it may be an issue with the latch closing. We'd recommend making sure that the gap between the top of the door and the lid are the same distance on each side. If it's off the door latch will not close correctly, you can adjust the front feet to correct the gap. If you need further assistance please feel free to call us on 1300 369 744 to discuss.
Regards, Bosch Home Australia.

Tien

Tienasked

Serie 4 Dishwashers

what is the different between Bosch SMS46GI01A Dishwasher and Bosch SMS46KI02A Dishwasher.
Cant find review on Bosch SMS46KI02A Dishwasher to review before purchase.

2 answers
gayle
gayle

On the other dishwasher you mentioned wh

gayle
gayle

On the other dishwasher you mentioned with the control where the button is it is hidden inside the door when you open it but on one we got it’s on the outside.

Nellie

Nellieasked

Serie 4 SMS46GI01A (Silver Inox)

Where is the Bosch Free-standing 60cm Dishwasher SMS46KI02A actually made?

1 answer
Bosch Home Appliances
Bosch H.Bosch Home Appliances

Hi Nellie, thanks for your question. The SMS46KI02A is assembled in Turkey. Regards, Bosch Home Australia.

David

Davidasked

Serie 4 SMS50E32AU (White)

When dishwasher is turned on it immediately reverts to end of cycle and nothing happens. The no water light does not come on so presumably water supply is not the issue. Any ideas?

1 answer
Megan
Megan

Maybe ask Bosch ! Ring the helpline im
Just a customer

Alan Wiltshire

Alan Wiltshireasked

Serie 4 SMS46GI01A (Silver Inox)

can my SMS46G102A dishwasher be connected to hot water?

2 answers
gayle
gayle

Yes it can be connected to hot water

Bosch Home Appliances
Bosch H.Bosch Home Appliances

Hi Alan, thanks for your question. We recommend a cold water only connect, if you do connect to hot water the temperature has to be below 60 degrees at all times. Regards, Bosch Home Australia.

Trevor H

Trevor Hasked

Serie 4 SMS46GW01A (White)

Just bought the sms46gw01a, our previous washer was connected to the hot water, I thought this one would be too but it doesn’t have the A00/A01 setting so I’m guessing it doesn’t. Am I still able to use hotwater or do I need to replumb?

3 answers
gayle
gayle

I am sorry I don't know but if you look up Bosch website and google it anything you want to know

Nick
Nick

Hi Trevor, we had it fitted by the installer from Appliances Online so I didn't do this myself. From memory, it only uses the cold water so I assume it heats the water up within the machine itself.

Bosch Home Appliances
Bosch H.Bosch Home Appliances

Hi Trevor H, thanks for your question. This model has a cold water only connection. Regards, Bosch Home Australia.

Rocky

Rockyasked

Serie 4 SMS46GI01A (Silver Inox)

Do you need a special adaptor for the inlet as mine leaks when connected as not forming a good seal?

2 answers
Nick
Nick

We had it fitted by the installer from Appliances Online so I didn't do this myself. So far so good. It was one of the reasons we went with Appliances Online.

Ash123
Ash123

My plumbing is 7 years old and I did not need a adaptor
Both the inlet and outlet are secured with ring clamps
To stop leaks

A.Ola

A.Olaasked

Serie 4 SMS50E32AU (White)

How do i use the vario speed function as the light was not flushing while I turn the dishwasher on and select the programme I want...is it a faulty one as i just bought it yesterday and connect it today?

1 answer
Bosch Home Appliances
Bosch H.Bosch Home Appliances

Hi A. Ola,
Thanks for your question regarding your Bosch SMS50E32AU Dishwasher.
You can use the vario speed function on all settings besides the quick wash and pre rinse.
If you have any further queries, please feel free to contact us on 1300 369 744 to discuss.
Regards, Bosch Home Australia.

Chrisbnz

Chrisbnzasked

Serie 4 SMS50E32AU (White)

Had the machine about 5 years. Having a problem that it does not release the detergent on full wash only on quick wash. We have had this problem for awhile now, had a repair agent but he could find no problem & cost us $500 NZ.
Don't want to buy a new one as it is a good machine & can't really afford a new one. Any help?

1 answer
Jakt70
Jakt70

Occasionally mine doesn't dispense the tablet properly and there's some residue. Have you tried both tablets and liquid? When my last dishwasher had the same problem I would just sit the tablet in the top rack somewhere and it seemed to work. I'd be questioning the amount you paid to have it seen, that sounds crazy high, especially considering there were not parts and no solution. Good luck.

Page 2 of 4

Get an answer from our members and Bosch Home Appliances representatives

ieatwords.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ieatwords.com.au may earn commissions for products/services purchased via affiliate links.