??!

498 questions from our users

Brett H.

Brett H.asked

Ranger PK (2009-2011)

My air con compressor is making a horrible banging noise only when the air con is on . Was the bearings are going will this come off eventually or will it just cease before I replace it?



No answers
Brett H.

Brett H.asked

Ranger PK (2009-2011)

Hi, my Rangers air con compressor is making a banging noise and seems to be loose at the front bearings. Can I still use the air con or is going to come off causing the belt to slip off also until I get back to fix it ?

No answers
Fritzy P.

Fritzy P.asked

Ranger PX.II / PX.III (2015-2020)

I have a 2017 XLT and in the last two weeks the AC has been blowing hot and then cold and in the hot weather we have had in Adelaide SA it is not engaging.
I have checked relay and ok.
Was recently serviced and they could not find a fault code.
Has anyone had similar happen?
Just trying to eliminate the obvious before taking it back to ford.
Thanks in advance

2 answers
Wayne Rye
Wayne Rye

It'll be the blend actuators/doors under the dash. I have the same thing. I found by pressing the aircon buttons to max alternate between hot and cold. It fixed mine for a while then I do it again

alan e
alan e

Hi Wayne I have the same problem as Fritzy have you had yours repaired, you sound confident with the problem solution or had a quote to have it repaired.



Pieter J.

Pieter J.asked

Ranger

Good day i have resently bauht a second hand ford ranger 2.2 t6 manual 2013 model and since i got it, it revs up nice and all is good while standing in neutral and while in reverse but as soon as n start moving forward in 1st the traction control and drivetrain light comes on and goes into limp mode any idees and suggestions please?

No answers
Ben

Benasked

Ranger PX.I (2011-2015)

hi my ranger 2015 3.2 manual is giving trouble. The speedo is going up and down you can feel it when driving. I think it might be a fuel problem, its not doing it all the time. Can you help thanks. Ben

No answers
Colin W.

Colin W.asked

Ranger PX.I (2011-2015)

My 2011 3.2 6 speed manual has trouble shifting gears. Although the clutch feels like it has heaps of life left in it. Ideas?

No answers
Sedman C.

Sedman C.asked

Ranger PJ (2007-2009)

It wont rev past 2 and a half grand its a 2.5 pj ford ranger 2008



No answers
Robert H

Robert Hasked

Ranger PX.I (2011-2015)

I have a 2015 PX1 Ranger 2.2L Auto. The car alarm has started to go off for no apparent reason. I just rotated the steering wheel until it locked to see if somehow that could help. It is in "park". Any ideas?

No answers
Krista

Kristaasked

Ranger

Hi, we have a 2014 XLT model. It has only just started to make a sound of rushing wind/ or as if you have the fan on high when accelerating. The noise is clearly coming from under the hood, passenger side. It only does this in DRIVE only, not in any other gear. Also using a lot of Diesel. Idles and seems to run okay though.

No answers
Lalita G.

Lalita G.asked

Ranger PX.II / PX.III (2015-2020)

Where is the outer speed sensor located on the automatic transmission in the 2015 t6 ford ranger?

No answers
Werner

Wernerasked

Ranger PX.I (2011-2015)

i have a 2.2 diesel ford ranger my back right hand side indicator, not working i did put a new lamp. Any help?

No answers
Steve

Steveasked

Ranger PX.II / PX.III (2015-2020)

I have a 2017 Wildtrak 3.2l in an auto and just went in for the brake line recall a week ago and now have been driving it and today noticed on the freeway when u accelerate and it kicks back a gear it starts slipping in and out of gear is this something related to a program update at its last service or a common thing that happens??

No answers
baz

bazasked

Ranger PJ (2007-2009)

How many litres of transmission fluid goes into a 2007 ford ranger transmission 4x4

No answers
James P.

James P.asked

Ranger PX.I (2011-2015)

hi guys i need HELP!

bought a 2nd hand 2011 px ranger and the TCM (transmission control module) has been replaced twice already through awn warranty. 1st time in march then august and now ive got traction contro and abs lights appearing and dis appearing. took it into ford and they say its the same part and needs replacing. im at my wits end with this what is causing this issue and how do i prevent it!

1 answer
Robert H
Robert H

I had the traction control lights coming on and going into "Limp" mode in my 2015 PX1 Ranger and it was a faulty speed sensor in one of my rear wheels. I fitted a Flashlube oil catch can and the drive train light stopped coming on and no more "limp"mode either.

Ken A.

Ken A.asked

Ranger PX.I (2011-2015)

Will a wildtrack rollerdeck from 2015 ranger fit a 2012 ranger ?

No answers
Jonathan M.

Jonathan M.asked

Ranger PX.I (2011-2015)

Hi I have a 2015 ranger 3.2 diesel auto won't start. Engine light came on and traction light. And standard comes up on dashboard any idea's what's wrong thanks guys

2 answers
Corey
Corey

Hi Jonathan, i am just curious to know if you have had this problem fixed??

Big Bri
Big Bri

Hi Jonathan we have a similar problem with the company ute (2012 PX 2.2 litre). Did you find a fix for yours? Bri

Scott M.

Scott M.asked

Ranger

Hi there I have a 2013 PX ford ranger xlt 3.2, the issue that Im having is surging when ute is cold on start up. When its cold Im getting vibration and the same time as surging @ 2000rpm. But once its proper warmed up to it pretty much stops, Ive had a trans service and theres no signs of air leaks anywhere. Would that be anything to do with the thermal bypass control Value or any of the ERG sensor. Im not yet change the fuel filter yet but that was last change 20k ago. Cheers

No answers
Daddy A.

Daddy A.asked

Ranger PJ (2007-2009)

My 2007 ford ranger pj 2007 has an engine light on after going about 120km down a road no more then 3000rpm as well sounds find, no strange noises for bad performances. What could be the problem? Thanks.
Aidan

No answers
Mark S.

Mark S.asked

Ranger

I used to own a 2015 px2 xlt ranger from new.
Was disapointed with the engine rattle noise until the engine warmed up about 5 minutes into the drive. Once warned up the ute was perfect. Worse in winter and that bad that all of my neighbours noticed it as well. Every 6 weeks it would go back to Ford to fix, but yep 6 weeks later same thing. I am fussy with cars, and $56k you should be. Utes now gone and was never told what the problem was. Any one have any idea? Been given a px2 2.2ltr work ite and guess what, same thing. Any ideas?

No answers
Jacob

Jacobasked

Ranger PK (2009-2011)

When turn sharp left or right then mount the curb I get this loud noise coming front the front. Hard to explain, sounds like squealing metal. When driving normally no noise. Even when I mount the curb and dont turn sharp. Seen a BT 50 made the same noise, so it must be a common issue.

2 answers
Boxy
Boxy

Grease the steering stops. They touch the control arm when you are at full lock, and when the wheel then goes up over curb the metal stop scrapes where it touches the control arm.

Jacob
Jacob

Hey Boxy, thanks for the reply. I done what you said. Spot on man!!! Problem solved. Thank you.

Page 4 of 25

Get an answer from our members

Other Utes

Previous
Next

ieatwords.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ieatwords.com.au may earn commissions for products/services purchased via affiliate links.