Read also:
thermann electric hot water systems reviews stirling portable air conditioner review ryobi 175cc subaru 4 stroke lawn mower welling f700 stereo turntable review fisher and paykel quicksmart drum clean ryobi rpw140-g reviewWestinghouse WSF6606X (Stainless Steel) Questions & Answers (page 2 of 6)
110 questions from our users
June B.asked
My dishwasher is flashing an error code of H13. It won't start a wash.
2 answers
Delay has been selected. Cancel delay setting
Thanks very much. I sorted it out Paul. June
June B.asked
Error code of H13. What does that mean? It won't start the wash.
No answers
Richard B.asked
How do I change the default wash program?
Samantha Janeasked
Are the dishes supposed to be dry at the end of the eco cycle? I installed mine today and the first wash on eco the dishes came out soaking wet. Whats the point of the dry cycle if they are wet?
2 answers
It dries the dishes slowly to save energy, I do my wash in the night and in the morning when I get them out its dry and very clean. happy with is product.
Hi. I think mine is faulty as the dishes are far too wet and aren't even dry in the morning
Melissa Hattinghasked
Hi our dishwasher takes awhile after pressing on to switch in and then display SP and run through till 9.5SP then gets stuck in eco. When we switch off and on again it does exuthe same. We use it around 1x a week and have had it now for 18 months. Help please
No answers
Nadsasked
Westinghouse Dishwasher SB926SL - stopped working and panel display is stuck to 90 and is not changing. We have tried turning on and off and ending cycle etc but it seems the program button isn't working....On turning off and ON from the power switch, it goes back to 90 minutes. Is it a good idea to call a technician or change the dishwasher?
No answers
Dean. Rasked
Have a new dishwasher which doesn't dry the dishes very well even on Eco setting as suggested in manual. Also problem with bottom drawer coming off runner all the time. Any answers would be appreciated
No answers
JJFGasked
Hi I keep getting F5 error. Drain is clean... any ideas ?
No answers
RaeBeavasked
I can’t change cycle on my dishwasher - but instead of running 2.02 eco cycle, it is going for 0.01!
Tried unplugging & it comes up SP, lights flash & then runs through 1.SP-9.SP (I’d say about 5-10 minutes).
I have have this machine for about 3 yrs & no problems (except for a fault when first installed)
Can anyone help me diagnose this please - nothing in the manual
1 answer
The Dishwasher powder / tablet compartment is open. Close it, select programme,.... Start.
Bruce and Sandra M.asked
What does H24 mean
No answers
Bruce and Sandra M.asked
whAT DOES h24 MEAN
1 answer
Hello Bruce and Sandra,
H01-H24 refers to time Delay. So H02 means you have selected two hours delay.
Cancel the delay setting if you don't need it.
Paula P.asked
Hi my dishwasher is coming up with H12 error
No answers
Tracey M.asked
Im getting the f5 error how do i get to the pipe thats connected to the pump any help would be great
1 answer
I am Getting the f5 error too, seems to be when it goes to do a rinse after a heating wash cycle. as in on intense cycle at 1hr and 3 left it drained then flashes F5. tried it on rinse cycle straight away after 2min same deal .
Mike in Redcliffeasked
My dishwasher powers off completely two minutes before the end of every wash cycle except for rinse. Have to open the door for a few mins and close and press the on button several times before it finishes the last two minutes of the wash cycle and drains, have noticed it is very hot and steamy. Thoughts? Before I call a service man or do I buy a new dishwasher it is four years old
No answers
Helena Sowdenasked
Power button stopped working 2 wks ago, now flashing HO1
No answers
Kenneth Aasked
To Whom it may concern,
The Rinse aid light will not extinguish after I have filled the rinse aid dispenser.
My daughter has the same dishwasher and is experiencing the same issue
No answers
Aliasked
Hi
I’ve a Westinghouse dishwasher wsf 6606x
Code h21 is flashing on the display. Can you advise what it means please?
1 answer
Sorry, I've no idea. I only press the same two buttons and leave it on eco setting. you can probably find the manual on the Westinghouse website to troubleshoot
Graham Ahrensasked
My Westinghouse dishwasher Wsf6606x is showing f8 fault, what is it?
Frankaufasked
II have a dishwasher Wsf6606x displays a F5 fault. Checked and confirmed that the inlet solenoid valve is operational by connecting 240 volt directly to the valve. When measuring voltage going to the inlet valve its 50 volts. have a dishwasher Wsf6606x displays a F5 fault. Checked and confirmed that the inlet solenoid valve is operational by connecting 240 volt directly to the valve. When measuring voltage going to the inlet valve its 50 volts.
Does this require a new PCB or is it a wiring issue.
4 answers
Question should be directed to Westinghouse or a Repairman. Thank you
ELECTROLUX ..Westinghouse
Hi Frankauf,
Tania from Electrolux here.
We are sorry to hear you are experiencing problems with your Westinghouse dishwasher.
If you wish to discuss this further please feel free to contact me at [email protected] attention Tania.
Thanks,
Tania
Hi,
My Westinghouse WSF6606X shows a F9 error code after a min. 7 months old machine from good guys.
Can you please help?
Thanks
Email
Fearne Mobasked
Hi,
My Westinghouse shows a F9 error code woth flashing lights. (Flow control error)
Where is the "Flow Control" located on the machine?
(I have made an educated guess but would like the facts please. )
Part ID in user Manual is very vague in this respect.
Had unit for 13 months - everything worked well until today. Fails on any cycle.
No blockages, no kinks, not good.
Any tips would be greatly appreciated - b4 calling a service technician.
4 answers
Sorry....I have no idea.
Sorry, too technical for me. I have never had an error occur. Try calling Westinghouse, they can sometimes help with advise over the phone. Check warranty which is regarded as "reasonable use" so 12 months doesn't always cut it as reasonable. I push this with companies now as legislation backs it up. Good luck.
Handy Husband fixed it, our error F9 fixed by, Googling (Google) - Westinghouse dishwasher model wsf6608x flow control valve, under images open the pic diagram 942001222 00 - Wholesale Appliance Supplies, spare part 123 cost $9.90 picked up part from Northside Appliance Spares & Repairs Pty Ltd, 189 Robinson Rd, East Geebung, QLD, [email protected]
(Facing the dishwasher take off the left side panel and replace 123 part)
ieatwords.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ieatwords.com.au may earn commissions for products/services purchased via affiliate links.