??!

36 questions from our users

tony barber

tony barberasked

Bronte SRK63ZRA-W (6.3kW)

noise levels in dba for bronte 63kw



4 answers
R.singh
R.singh

Hi can you pls explain bit more.

Mitsubishi Heavy Industries
Glen A.Mitsubishi Heavy Industries

Hi Tony,

This varies depending on whether you have it on heating or cooling mode and on which setting however on the lowest setting on cooling, the 6.3kW Bronte indoor unit goes down to 25dB. You can download the brochure which includes all technical on our website - https://mhiaa.com.au/document/residential-air-conditioners-split-systems-brochure/

tony barber
tony barber

thanks I will go up to 7.7 kw unit



Malcolm

Malcolmasked

Bronte SRK71ZRA-W (7.1kW)

I am purchasing a MHI SRK71ZRA-W-Set and a MHI SRK25ZSA-W-Set. The outdoor units will be installed alongside the brick side wall of my house which has no windows, bedrooms are located behind the wall. I am constructing a common slightly raised concrete plinth to mount the units. I have made the plinth dimensions 500 wide (off the wall) and 2090mm long. will this be OK and give the best distance between the units? I based the width on the 7.1 unit which is noted as 340 wide + 100 min rear space from the wall. But the information I can access does not show footprint dimensions which include the mounting feet/lugs. Basically I want to ensure that the unit will be contained within the plinth extremities and give the required clearances.

5 answers
R.singh
R.singh

Hi Malcolm My srk25zsa-w is installed back to back. Outdoor unit is on brackets. Urs one is 7.1 kw and mine is 6.3kw both are bronte series. Mine 6.3kw main unit is installed in family hall and outdoor unit is installed at least ten metres away. Installer got the pipes through the roof and out from ceiling and install outdoor unit on brackets.its safe I was thinking to put readymade slab which you can buy from bunnings. Saves space if u put on brackets that’s all.dimesions ur asking best to ask from air con installer.

Mitsubishi Heavy Industries
Glen A.Mitsubishi Heavy Industries

Hi Malcolm,

You should allow at least a 250mm space between both of the units for proper serving and at least 1m from a wall (on any side) to allow for proper ventilation.



I recommend speaking to an authorised installer who can give you some more information. You can find your closest installer on our 'Where to Buy' function - https://mhiaa.com.au/home/where-to-buy/

Hope this helps!

Malcolm
Malcolm

Hi Glen, great, thanks for the reply. Would you also please tell me how much drained water (say Qty per hour) I can expect to have discharged from each indoor and outdoor unit. Unit drainage will go onto a solid paved area, for this reason I intend putting in a ground drain to pipe any water away to discharge into a garden area. I see an elbow is available as an accessory for piping drainage. As I noted, I intended using a concrete slab/plinth to mount the outdoor units on. Will I be able/have room under the units to pipe the drainage away, and what size is the elbow and pipe? (presume PVC plumbing pipe is used?). Because, I note that installation instructions state a 100mm clearance is required under the mounting feet/face for drain piping. Why is so much clearance needed? This clearance is surely only needed to pass a small drain pipe under the unit?
Thanks and Regards,
Malcolm

Glenn W.

Glenn W.asked

Mitsubishi Bronte Series

I have an open kitchen/living area of 73m2. Insulated ceiling 2.5m high, some North facing windows but shaded by trees, in Melbourne. Would you recommend the SRK95 or SRK80?

5 answers
Mark
Mark

I have a 7kw model and it cools half of my house

Mitsubishi Heavy Industries
Glen A.Mitsubishi Heavy Industries

Hi Glenn,

While it's hard to 100% confirm and do we recommend getting one of our dealers to accurately measure up your room and provide a quote, our room sizing chart should give you a good indication of which size unit would be suitable. Looking at the chart (which you can find on our website here - https://mhiaa.com.au/knowledge-centre/) a 9.5kW Bronte unit would likely be the best solution.

Glenn W.
Glenn W.

Oh ok, thank you for that Glen, didn't see that chart. I've had a couple of quotes and one recommended the 9.5 and another the 8, hence my question. Maybe I should get another to confirm.
If the answer lies somewhere in between, is there any problem slightly "oversizing" than undersizing?

Narna

Narnaasked

Mitsubishi Bronte Series

Hi, I'm considering one of these more for efficient winter heating - has anyone used it for such a thing, especially in Southern Tassie? Or in reality should I consider a different method all together.

Also, are the Bronte's compatible with the MHI Wifi card? We like our tech toys and are definitely after this type of feature.

1 answer
Mitsubishi Heavy Industries
Glen A.Mitsubishi Heavy Industries

Hi Narna,

Thanks for getting in touch! The Bronte series is definitely compatible with our newly released Wi-Fi Adaptor which sits hidden within the unit itself.

Regarding using your split system during winter in Tassie, split systems are definitely one of the more energy efficient heating solutions available. I suggest you head to the Energy Ratings website to do a proper comparison. You may also want to check out our new, highly efficient Avanti PLUS series which boasts industry leading star rating and goes up to 6.0kW, making it perfect for up to medium spaces.

graham.anderson1

graham.anderson1asked

Bronte SRK95ZRA-W (9.5kW)

Hi .Would this unit cool our shed it is 9mtrs x10mtrs 2.9 mtrs high walls 22 degree pitch roof line . We live in Narrabri N.S.W . If so would you recommend a dealer . Thanks Graham

4 answers
Mitsubishi Heavy Industries
Glen A.Mitsubishi Heavy Industries

Hi Graham,

While the 9.5kW Bronte is our largest unit and should be able to cover that space in optimum conditions, there are a number of other factors to take into consideration such as insulating type, floors, window size and location plus many more. I'd suggest speaking to Haymans in Narrabri (02 6792 6066) who could give you some more information and refer you to a local installer.

Hope this helps!

Thanks for respnding I will go and speak to them shortly . They do have a couple of units . Are the 2022 models different to a unit of last season . Our shed has a concrete floor, insulated roof, no windows, 3 roller doors and soon to be insulated walls Thanks Graham

Mitsubishi Heavy Industries
Glen A.Mitsubishi Heavy Industries

Hi Graham,

While there's no difference between the same model that may be manufactured in a different year/season, they are differences between series/models. Haymans will be able to assist you further.

Mick

Mickasked

Bronte SRK71ZRA-W (7.1kW)

Whats the difference between models Mitsubishi Heavy Industries C7.1kW H8.0kW Reverse Cycle Split System SETDXK24ZRA-W and Mitsubishi Heavy Industries Bronte C7.1kW H8.0kW Reverse Cycle Split System SRK71ZRA-W?

1 answer
Mitsubishi Heavy Industries
Glen A.Mitsubishi Heavy Industries

Hi Mick,

Thanks for getting in touch!

The DXK has been superseeded by the SRK models however they are exactly the same model with the same features and functions.

Hope this helps!

treeclimber

treeclimberasked

Bronte SRK71ZRA-W (7.1kW)

what's the difference between SRK71ZRA-W / 7.1kW and MSZ-GL71VGD

3 answers
Jaymate
Jaymate

One is by MHI the other ME. I bought the Mitsubishi SRK71 and it's WONDERFUL, much more powerful airflow and faster cooling thanks to PAM. Highly recommend you get the SRK71. Sorry for not directly answering your question with what are the exact difference's, I lazy, but can answer any specific questions if you wish :)

Mitsubishi Heavy Industries
Glen A.Mitsubishi Heavy Industries

Hi Treeclimber,

Jaymate's correct! We're actually a completely separate company from Mitsubishi Electric and while Mitsubishi Electric produce other appliances such as fridges, hand dryers, etc we specialise in doing one thing and one thing well which is producing heavy duty and high quality air-conditioners for the Australian and New Zealand market

Our 7.kw Bronte unit is as tough as they come and on top of its 4.7star review, has just been recommended by CHOICE, Australia's leading advocacy group.

Hope this has helped buy if you need anymore information, don't hesitate to let me know.

Glen

Mark
Mark

My SRK71 has been awesome for the last few hot days in Melbourne. It basically cools the whole house if turned on early at a moderate level. Not the cheapest unit, but well worth the spend. And it seems to be pretty efficient with power. I was surprised by my last electricity bill.

Brad C

Brad Casked

Bronte SRK71ZRA-W (7.1kW)

Does this unit come with a remote? Rather than using the wireless feature as we don't have any type of network at home.

2 answers
Doris
Doris

Yes it comes with a remote.

Mitsubishi Heavy Industries
Glen A.Mitsubishi Heavy Industries

Hi Brad,

That's correct. All MHIAA split systems do come with a wireless remote control.

Glen

Jason Bailey

Jason Baileyasked

Bronte SRK95ZRA-W (9.5kW)

When running the fan only. As a room filter (no A/c or Heat) what watts would be used? Also does it take pollen out of the air? Thanks

2 answers
Jaymate
Jaymate

Depends what fan speed, at max speed maybe 30watts (When compressor is running max it draws 2560watts on average for the 9.5kw, in comparison a LED light bulb uses about 7watts). Not sure exactly how many watts but it wouldn't be much at all. It's really only the compressor that uses energy but that isn't running when just the fan is on. I don't think it filters pollen, it has a 'Allergen Clear & Photocatalytic Washable Deodorizing Filter'.

Mitsubishi Heavy Industries
Glen A.Mitsubishi Heavy Industries

Hi Jason,

Thanks for getting in touch!

The Bronte series incorporates two different filters. One is an Allergen Clear Filter which incorporates a specialised Enzyme and Urea compound and is designed to capture airborne allergens such as pollen and dust. The Enzymes within the Allergen Clear Filter, which are activated by moisture generated during the 'Allergen Clear Operation', deactivate and break down the captured allergens, including any bacteria, mould or viruses they may be carrying.

The second is the Photo-catalytic Filter which is designed to deodorise any odour causing molecules within the air. This can be washed and dried, ensuring sustained clean air.

Both of them continue to work even if the unit is functioning in fan only mode.

Hope this helps!

Glen

Tommy

Tommyasked

Bronte SRK71ZRA-W (7.1kW)

Can some one help me I am thinking of buying a SRK71ZRA-w and mounting the unit on the roof instead of the outside wall does it matter for performance some people say on the wall is better But I want to but unit on roof because of children playing exc Thanks you your feed back welcome

1 answer
april4
april4

Too open to the elements on the roof. Compressor functions better with some protection and would last longer.

Larry

Larryasked

Mitsubishi Bronte Series

What is the difference between the DXK-ZRA-W and the SRK-ZRA-W?

1 answer
april4
april4

Not sure. I did do a lot of research when I bought it, but have not kept the info.

Laurie

Laurieasked

Bronte SRK71ZRA-W (7.1kW)

What is the energy star rating?

2 answers
april4
april4

Not sure, but from memory it is about a 2 as it is a bigger system.

Jaymate
Jaymate

It is one of your products... It's the 7.1KW Bronte. The 7.1KW model has a 3 Star Cooling and 3 Star Heating. This is best in class as Panasonic only has 2.5 star cooling and 3 star heating and other brands again are only 2.5/2 cooling and 2.5 heating.

Cerdig

Cerdigasked

Bronte SRK71ZRA-W (7.1kW)

I heard the SRK71ZRA-W only has four fan speed settings. Is that enough settings? Apparently the SRK63ZRA-W has eight fan settings.

3 answers
ckeogh74
ckeogh74

Plenty for us, we either have it in high when it's super hot and I want to blast the air through the house quickly when we have been out and the house is hot. (we live in QLD). But most of the time we just have it on economy setting which is a low fan setting and it's perfect!

Cerdig
Cerdig

Thanks. I'm procrastinating over whether to get the SRK71 or the SRK63. The 63 is probably enough for my needs but the the 71 is $250 cheaper at Bunnings, which makes me suspect there must be a difference other than just the output.. Otherwise I'll probably go for the cheaper and more powerful unit.

The indoor outlets on these units are fairly big. Do they look ok or are they a bit dominating? I was going to mount mine in the centre of the lounge wall near the tv, to get the best airflow.

Jaymate
Jaymate

They look very contempory, I would get the more powerfull one. Probably cheaper because it is going to be the most sold model, they want it to be bery competitive price wise. I am getting the SRK71 too :)

Phil2929

Phil2929asked

Bronte SRK71ZRA-W (7.1kW)

Hi, Just wondering how your unit is running since your purchase as I noticed bunnings is selling this unit cheaper than any suppliers Aussie wide. Just had someone come today to quote supply only as everyone else wants to sell you more units throughout the house.Cheers.

2 answers
ckeogh74
ckeogh74

Hi there, we love it. We can't fault it. We often just have it on economy setting at 23/24 C and it keeps the house cool. It's super quiet, you hardly hear its on. We would def buy the same again.

Ol codger
Ol codger

More than happy with this air conditioner. Super quiet on low fan speed, in fact so quiet you have to look at the air con to see if its actually open and operating. On very hot days in Adelaide, e.g. 40 plus, we set it on 18 and lift the fan rate to about half speed. Does the job perfectly.

Jaymate

Jaymateasked

Bronte SRK71ZRA-W (7.1kW)

Hi, I am about to buy this a/c because in my research and comparisons it beats all other a/c's in almost every regard and at Bunnings it is only $1400 atm for the 7.1KW. I just wanted to know when the fan is on the highest setting does it really go 18M, I just want to know if you feel that it goes very far and the fan blows on you powerfully? and also is the lowest fan speed very low?

3 answers
april4
april4

I've never had mine on the highest setting as I have left it on auto since installing. It goes very quiet once the room is cool, but if you want good circulation in a big area then you will need a higher fan speed than auto. Hope this helps.

Ol codger
Ol codger

That is a good price, so I would suggest you grab it. I am not sure if the fan speed goes to 18m, but I have never needed to use the highest speed, and I usually set the fan speed at the lowest setting, (which is almost impossible to hear), or about mid range if very hot outside. The fan can be heard at mid range, but overall is very quiet. Our living area is about 55 sq. metres, and on the lowest speed the air conditioner works brilliantly, dropping the temp down quite quickly within about 30 mins. At 40 degrees it has to work a bit harder, but overall extremely pleased with this air conditioner. When I did test this out, the cool air pushed right up the 25 metre long passageway, and pushed cool air into every room along the way. Rated No. 1 by Choice, and that rating is well deserved.

Jaymate
Jaymate

Ok thanks!! I am cooling a very large area so that was why I was wondering. 2 last questions if that is ok ;D 1. Does the remote allow you to adjust the a/c in .5C increments(not that it matters)? 2. Do you notice that the inverter board controls it properly and when there is a low heat load that the compressor and outdoor fan slows down as it should? Gonna buy the A/C mid Feb and then (almost certainly) drop a 5 star review. Thanks heaps for answering my questions.

Peter S

Peter Sasked

Bronte SRK63ZRA-W (6.3kW)

Hi, you mentioned the total cost was $2300, may I ask how much the installation cost was as that's the unknown factor? Cheers

2 answers
ckeogh74
ckeogh74

The unit was around $ 1700 install about $ 600

Ol codger
Ol codger

About $600 to install.

Page 2 of 2

Get an answer from our members and Mitsubishi Heavy Industries representatives

ieatwords.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ieatwords.com.au may earn commissions for products/services purchased via affiliate links.