Bellini BDW127 Series Questions & Answers (page 5 of 5)

If it is still under warranty, better have the technician look into it. Otherwise, don't waste your time. If just over 2 years old, ask the retailer to either have it fixed or have it replaced. Under the Australian Consumer Law, the retailer has the responsibility to give you remedy for a defective product that they sell. They should not refer you to the manufacturer.

Did a quick search on line This may help

Selleys Seal Fix cures to a tough, durable silicone rubber that is ideal for repairing or replacing worn out seals in domestic ovens, fridges and freezer doors as well as automotive and appliance gaskets.

High Temperature Resistance up to 260C
Durable, clear rubber seal
Ideal for vertical applications
Impact resistant

After 4 months I took the my Billini dishwasher back to Bunnings and asked for a full refund, and received it, as the product had continual problems, this is the only answer i can recommend for Billini dish washers, as their service call back was non existent, Bunnings need to ditch the brand, but to their credit they did give a full refund, when I turned up to the front; returns and refund counter, with the dish washer. They were polite, I told them I was not happy with it, as i had continual problems and they refunded, no further questions.

Thank you very much for responses. I am going to try the Selleys Seal Fix and if no luck with that I will be returning it to Bunnings for a refund.

Hi Gina,
Sorry Mine was so bad that I ditched it and bought a Miele after just a month, so didn't encounter your particular problem, but I am sure I would have eventually lol. Good luck with it!

Thanks, i might do exact same thing

Did you ever resolve this issue as I am now having the same problem.

For anyone who has a similar problem, this specific error indicates that there is a problem with the heading element (abnormal heating). I have no idea what that means specifically, except that you will likely need to get the machine serviced / replaced / thrown off a bridge. This is all in the manual, which you can find at the following address (search for the model number): http://www.belliniappliances.com.au/cooking/useandcare.aspx

Page 19 of the manual should have a list of all the error codes and what they mean. Hope that helps.

It got thrown out as totally useless!!!!

Try turning itvoff at the wall. Unplug it preferably for an hour. If it doesn't run youll havecto contact the manufacturer. Goodcluck there.

I had the same issue. You need to get a replacement part and have a tech install it. That was my first issue. The replacement part did not solve it so they had to replace the whole dishwasher - sorry.

Not sure if this will help, but I only fill the dishwasher half to two-thirds. I tend to always use pot scrub or higher on settings, always clean the filter otherwise I end up with grit. I use Costco brand tablets. They are in little plastic packs. Gave up on the boxy finnish style after the same problem after the first go.

I complained to Bunnings about it. Suggest you call local store and say you want the complaint sent to head office as you know that others have complained about the dishwasher and head office has called them back. Not sure what Bunnings will do but if more complain maybe they will do something. I live in Canberra.

We had NO problem with washing tablet used; FINISH POWERBALL. Can only suggest that you may NOT be correctly closing tablet area. Our difficulty with Bellini was the bottom shelf being too large in Three Bellini Dishwashers for fitting correctly. It pulled out the Rubber Door Seal. Yes Bellini replaced it TWO more times from original. NO Refunds. When you put the tablet in place; ensure that the lid is FULLY closed. This is ONLY suggestion we can give. When our THIRD dishwasher after TWO uses was also pulling out the door seal; we went back to Bunnings' . We NOW have a Dishwasher by Fisher Paykel, an ELBA. Working well! Hope thjis helps. DJP

How long have you had the dishwasher?
It is probably the pressure guage that connects to the tap. You can buy the whole pipe and replace. I chose to buy a new one as mine was 4 years old.

Ensure that your rinse aid is always full. As soon as mine gets low the dishes don't dry as well. This is what the rinse aid helps to do. Also run a cleaning agent like CLR through it. That helps clean off any scale in the machine. Dirty water does not rinse off as well.

thanks for your input we have worked the rinse aid part out,but thanks for the heads up on CLR never gave that a thought.Cheers Ian.