??!

1455 questions from our users

Floody2169

Floody2169asked

V6 Animal

My Dyson works fine on normal mode but on Max it cuts out after about 10 seconds. I have cleaned out every filter and disconnected and reconnected the battery, however it still didn’t work properly on Max mode. I contacted Dyson and they believed that it was the recharger, even though it was just out of warranty they sent me a new one, and they were fantastic to deal with. I received the new charger but it didn’t fix the issue. Please help me as I Love my V6 animal but I really need to be able to use the Max mode.



No answers

Angie

Angieasked

My Dyson Animal keeps stopping on boost but is fine when boost switched off have cleaned all filters. Any help?

1 answer
Dyson
Dyson Team ..Dyson

We are sorry to hear your machine isn't working in Max mode

If your Dyson V6 is working well otherwise (i.e. picking up dust and debris) when not in Max mode, and the charger lights up when the machine is plugged in, it would indicate the battery on the machine would need to be replaced. You can purchase a replacement battery for the Dyson V6 here: https://shop.dyson.com.au/spare-parts/battery-967810-21

If this isn't the case, the machine is under two years old, or you have any further queries, our Dyson Experts are available via [email protected] and we will be happy to help.




SHstock

SHstockasked

V6 Animal

My v6 animal has had a replacement 3.0AH battery which worked fine for a couple of months until it stopped and when it is put on charge the solid blue light comes on but does not ever go out and the unit does not charge.
Is this a charger a battery fault or something else?

1 answer
Dyson
Dyson Team ..Dyson

So we can give an accurate answer, we would encourage forwarding your query to our Dyson Experts via [email protected]. We'll be happy to run you through troubleshooting to help detemine what is happening and get an outcome for you.

We look forward to hearing from you and assisting.


Peter D.

Peter D.asked

How do clean basket and other bits



1 answer
Dyson
Dyson Team ..Dyson

You can find instructions on how to maintain your Dyson V6 via this link: https://www.dyson.com.au/SupportHome/Vacuums/Cordless/Dyson-V6/209468-01/maintaining-your-dyson-machine

Should you have any further queries, our Dyson Experts are available via [email protected] and happy to help.


Paul O.

Paul O.asked

The battery is new and fully charged been working fine but wont wont now when pulling the on button. Any help?

2 answers
Angelito
Angelito

Hi Paul,
There are several things you need to check. Ist maybe battery is faulty. Second might be the bin. Bin must be cleaned once full. Lastly, it might be the head. That needs to be cleaned as well. Hope this is helpful for you. Otherwise, just go back to the shop and let them check the battery for you.

Dyson
Dyson Team ..Dyson

Our Dyson Experts will be happy to help get this sorted. Please just forward your details and the serial number of your machine to [email protected]. We will be in touch to assist.


david

davidasked

V6 Absolute

It just displays a amber light when you pull the trigger ?

1 answer
Dyson
Dyson Team ..Dyson

An amber light usually means the machine is too hot or too cold to run. We would recommend leaving the machine in a room between 3 degrees celcius and 40 degrees celcius for half an hour before retrying or charging the machine.

If we can assist further, our Dyson Experts are available via [email protected] and happy to help.


Jamal M.

Jamal M.asked

My Dyson v6 fully charged stops after 15-30 seconds. Any help?

1 answer
Dyson
Dyson Team ..Dyson

We are sorry to hear about this. So we can best assist and get a resolution for you, we would kindly encourage emailing your details and the serial number of your machine to [email protected]. Our team will then be in touch shortly to help.


Keven A.

Keven A.asked

When put on max mode battery goes dead straight away? Any answer to why it’s been fully charged

1 answer
Dyson
Dyson Team ..Dyson

We are sorry to hear your machine isn't working in Max mode

If your Dyson V6 is working well otherwise (i.e. picking up dust and debris) when not in Max mode, and the charger lights up when the machine is plugged in, it would indicate the battery on the machine would need to be replaced. You can purchase a replacement battery for the Dyson V6 here: https://shop.dyson.com.au/spare-parts/battery-967810-21

If this isn't the case, the machine is under two years old, or you have any further queries, our Dyson Experts are available via [email protected] and we will be happy to help.


Julie s

Julie sasked

Have. Dyson animal 6 not working put a new battery in 6 months ago have cleaned filters taken apart and cleaned looks as new worked for a few months the nothing have repeated process including new battery nothing,,,,
Extreamly frustrating.

1 answer
Dyson
Dyson Team ..Dyson

We are sorry to hear your machine isn't working. Our Dyson Experts are available and happy to help get this sorted. Please just forward your details and the serial number of your machine to [email protected] and we will be in touch very shortly.


Jay

Jayasked

V6 Slim

Why doesn't it work properly? We have had one for 6 months now and at first it was great but, even after totally cleaning out, it just doesn't pick fluff and dust up. Very disappointed, will never buy this brand again.

1 answer
Dyson
Dyson Team ..Dyson

We are sorry so hear you are having trouble with the performance of your machine. Understanding you have cleared your machine, we would kindly encourage reviewing this video to ensure all areas were checked: https://www.youtube.com/watch?v=BCUY4crvKK8

Should you continue to experience difficulties, please forward your details to our Dyson Experts via [email protected] and we will be happy to help get this sorted.


Wendy A

Wendy Aasked

V6 Absolute

The felt strip on the motor head is peeling off. We tried hot glue to reattach, but it only lasted a day or so. What do you recommend to reattach it?
Used regularly for three years now, very pleased. Thank you

1 answer
Dyson
Dyson Team ..Dyson

If the felt strip has come off the head, we would encourage replacing the part it is connected to.

We would kindly ask you to forward your query, a photo of the effected part, along with the machine serial number and your details to [email protected] and our Dyson Experts will be be happy to assist.


Kay Naidu

Kay Naiduasked

Why Dyson v6 only goes for seven minutes then stops?

1 answer
Dyson
Dyson Team ..Dyson

To confirm, your V6 should achieve a run time of 6 minutes on max, or on normal mode, a run time of 16-17 minutes with a motorised floor tool attached, or 20 minutes without.

Standard out of the box, your machine will be on Max mode. To change to normal mode for the longer run time, while the machine is running with your finger on the trigger, press and release the "Max" button on the back of the machine. The "Max" button light will turn off and you will hear the machine change tone to indicate it is now running in normal mode.

In the event your machine isn't achieving these run times, please get in touch with our Dyson Experts via [email protected] and we will be happy to help.


Graham Marshall

Graham Marshallasked

Our Dyson v6 animal vacuum is abt 2 yrs old and when supposedly fully charged its runs for abt 1 minute then flat we then charge again for abt 5 mins then it works great any ideas as to why thanks

1 answer
Dyson
Dyson Team ..Dyson

This is certainly unusual and not something we would expect during normal operation.

We kindly encourage emailing our Dyson Experts via [email protected] and we will be in touch to assist and get this sorted for you.


Grant H.

Grant H.asked

how do you change filters

1 answer
Dyson
Dyson Team ..Dyson

You can see a video on how to wash the filter(s) of your machine here: https://www.youtube.com/watch?v=JzhCAfkRNDc

Please note, some machine's aren't equipped with the blue exhaust filter. If your machine isn't, please disregard this second filter.

If we can assist further, our Dyson Experts are available via [email protected] and happy to help.


Michael E.

Michael E.asked

Why does my Dyson v6 animal stop after 10 seconds when I switch it to high speed?

3 answers
Kirsty W.
Kirsty W.

That sounds like your battery. It's meant to last less time when using the high speed but not that much.

Cheap product
Cheap product

Mine does also. It’s only 2 years old.

Dyson
Dyson Team ..Dyson

We are sorry to hear you are experiencing a short run time from your Dyson V6, we are happy to help.

Please just forward the serial number of your machine and details to [email protected] and our Dyson Experts will be in touch very shortly.


Meg

Megasked

V6 Motorhead

My Dyson V6 Motorhead cordless vacuum- the motorhead has stopped spinning and there's hardly any suction. I've cleaned it fully and nothing is stuck. The vacuum works with different attachments. Just the motorhead doesn't work at all. Any ideas?

4 answers
Kirsty W.
Kirsty W.

Have you completely pulled the brush spin part out?

Meg
Meg

Yes.

Cheap product
Cheap product

Sometimes hair around the brush at the ends stops it spinning. But the product is cheap. I’m buying a new brush end off eBay as mine stopped working after a year or two


Steve

Steveasked

My V6 is not working, when I press it on it works for ten seconds flashing a blue light which then goes green, any ideas ?

1 answer
Dyson
Dyson Team ..Dyson

We are sorry to hear about this Steve. We kindly ask for you to forward the serial number of your machine and details to [email protected]. Our Dyson Experts will be happy to help get your Dyson V6 back up and running.


Sharon

Sharonasked

V6 Animal Extra

My Dyson will not charge. When I press the start button it flashes red 34 times. Does it need a new battery?

1 answer
Dyson
Dyson Team ..Dyson

If your Dyson V6 is flashing a red light 34 times, it would indicate the battery on the machine would need to be replaced. You can purchase a replacement battery for the Dyson V6 here: https://shop.dyson.com.au/spare-parts/battery-967810-21

If your machine or current battery is under two years old, or you have any further queries, our Dyson Experts are available via [email protected] and we will be happy to help.


david k.

david k.asked

When I put my machine on max it clamps to the carpet will not push the cleaner bar also stops spinning. Any help?

2 answers
Mark B.
Mark B.

Is your carpet getting pulled into the power head? Some attachments are not suitable for some flooring types.

Dyson
Dyson Team ..Dyson

This indicates that your machine is sealing too much to your carpet and unable to get sufficient airflow. We would encourage switching from the Max mode to the High Power mode to ensure your machine gets sufficient airflow to clean your carpet.

We hope this helps, but if we can assist further, our Dyson Experts are available via [email protected] and happy to help.


Sammi L.

Sammi L.asked

Would like to know what can be done for a battery issue? My device only works for about 30 seconds fully charged and on normal mode (not Max). Please advise thank you! I have the V6 Complete

2 answers
Mark B.
Mark B.

Have you contacted Dyson? They are your first option

Dyson
Dyson Team ..Dyson

If you haven't already done so, we would encourage getting in touch with our Dyson Experts via [email protected].

Our Dyson Experts will be happy to help run through troubleshooting and assist with a resolution.

We look forward to hearing from you and assisting.


Page 1 of 73

Get an answer from our members and Dyson representatives

ieatwords.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ieatwords.com.au may earn commissions for products/services purchased via affiliate links.